Відео

Are you turning off the mic that is picking up your voice while playing?

If my gigg is over 500 hours...I need to fire my booking agent😂

These sound great!! These are Not quiet correct?

S sounds great! Is there any bands that are using this

Nice video folks, thank you! An alternative method to the hook on the jack is to prepare a closed loop through the jack and the f-hole, consisting of a 6mm nut knotted/fixed on the loop below the jack, and the washer plus nut above it (outside). Then close the loop below the 6mm nut. Now, after pulling the jack through, secure it by pulling the loop up, next fasten the washer and nut. Once fixed, cut the loop and remove it and save the 6mm nut. Voilà, done! Perhaps someone will find this useful 😁

Any neck relief? Or perfectly straight?

One of the best to do it!

For the ground buss between those three caps, could you just run the leads from the two outer caps to the center eyelet, on the back of the board? Edit: I figured it out, connecting the leads from the main power section capacitors on the back of the board would make it very difficult to service later.

I would like to hear more examples of clean, crunchy, and overdriven tones. Some lead to get a better idea of what these soeakers do.

At 4:20 in the video. I can only see two preamp tubes. Is there a third one hidden behind a power tube?

Im so dumb ,Ive had mine out four times ,it finally hit me ,Look up a youtube video .thank you thank you

Simple man

Love this man

Top, the best Pickup! 😮👍🇦🇹👌🙋

I've been wanting to try an amp kit build for a long while now. I used to have a JMP 2203 (from 81 if I recall correctly) which I made the mistake of selling. I think this is going to be the first kit I assemble!

Awesome vocals !!!

Does anyone know the termination points ( PIN numbers in each tube sockets ) For the black and white wires that are being done for the heaters in this video? Which originate from the lamp? He started to go through it and then didn’t finish Thanks ahead of time.

Starting to really like these pickups. Was previously really interested in Dimarzio’s.

These awesome boys are going to be my next strat pickup set for my Vintera I 70s. How did you manage to let these pickups sound so vintage and "old" like a good old set of a 59 Stratocaster in a vintage store? Warm, creamy but still shiny without harsh treble.

no need to leave a comment or anything else to enter the giveaway?

Sounds awesome. I would use octave and fuzz to create more sustain on my lead patches.

Been waiting for demos for Lifeson signature gear.

hope i win this. my back needs relief.

You cant win if you dont play!

Not a stacked humbucker so how are they noiseless ?

Hey what is wrong with you . Neck straight with out strings ? what about trust rot tension ? 3 vibrato strings ????? who you bushitting ? what about the neck with stings on it ? any neck can be straight even with trust rot this engaged . what you presented is stupid . make that video again and respect people who are going to watch . what was neck release with string on it full tension that what you suppose to tell us .

I was thinking I’d get some of the it coils but this demo sounds so much better! Do you find there’s a big difference?

I've been playing 62+ years, Rene, and I use that same guitar-on-foot technique! You got that one right, for sure! And I think I prefer your nut lubrication to just about everything out there! I load all my strings first, as well. You set up for one of the best guitarists who ever played; but I have been setting up my Stratocasters by only feel, for over 60 years. You certainly need those measuring tools, though, to set up someone else's guitar! And i readlly like your technique of "thumbing-down" the strings at both ends of the neck to get that hump out of them where they cross the bridge and the nut. I use Raw Vintage springs which are quite unique, and I leave my bridge floating just a little, as I like the action of the tremolo with wiggle in both directions. Just as an aside ... my very first guitar was a 1954 Stratocaster my dad gave me in 1963, serial number 0517.

🎉🎉🎉

Oof, that sounds fantastic! 👏🏻

how can you tell? All I hear is fuzzy distortion. Proves nothing.

I like the option of Silicon, MOD and LED. Very cool.

Greyhound or Anthem 🤔

Hi does this speaker has a tight bass response? I have a hot rot deluxe and the Celestion A Type seems too loose/flubby in the low end

Does sledgehammer bridge pair well with black magic neck?

Nice! What bridge is that?

the lead times on these hurt

44 is the type of flux. That’s 60/40 (60% Tin and 40% Lead) solder. Lester flows well. I’ve usd their lead free solder and you have to use a higher temperature but it’s not bad to work with if you have a good iron.

My question is ; how much wire do you need for one pickup ?

This guitar is strung with 11’s. Just to close the loop… according to the bio Texas Flood, Stevie changed to 11’s after he got sober. After years of supergluing flesh from elsewhere on his body, he could actually ‘feel the pain’ for the first time. It reportedly was at the urging of his techs (inquire within), who had been telling him for years that there is little to be gained north of 11’s. Everyone who saw his last shows was unanimous that he never sounded better.

Is there anything cushioning the bridge at the body? Mine makes a smack when I let off on the bar. I was actually considering floating it like Jeff Beck, but I gather that Stevie Rey would never do that.

So what was the trust rot ajastment on srv guitar . what is the tentcion on the trudtrot ?????????????????????????

500 ohm pots really make a big difference.

sounds a lot less brittle than an actual Fender twin

Nice Speaker ! which speaker you recommend for Mesa Fillmore 50w combo ?

What song is that? Never heard it before and it sounds awesome!

Smoking 🔥

This is so cool. I have a mid 2000s Strat that I want to revive. Absolutely getting this.

Great, now get the tone for keep on rotting in the free world by carcass

The best procedure I've watched! Thank you.